Blog
Legom News
Tempering Valve for Hot Water Systems: The 50 °C Rule
Every stored hot water system has a conflict built into it. The tank has to run hot enough to kill bacteria, and the tap has to run cool enough not to scald anyone. Those two requirements do not overlap, and the component that resolves them is the tempering valve. It...
Hydronic Systems for Light Commercial Buildings: Design Guide
Offices, shops, clinics, small hotels, and restaurants sit in an awkward middle ground. They are too large for a residential system specification and too small to justify the engineering approach applied to a hospital or a tower block. This guide covers what changes...
Water and Energy Saving in Hot Water Systems: What Actually Works
Most advice on saving water at home focuses on fixtures: low-flow shower heads, aerators, dual-flush toilets. Those help, and they are worth fitting. But a substantial share of the water and energy a household wastes never reaches a fixture at all. It is lost in the...
Types of Water Heaters Compared: Tank, Tankless and Heat Pump
Water heating accounts for a substantial share of household energy use, second only to space heating in most homes. Which type you install determines what that costs for the next decade or more. Four types dominate: storage tank, tankless, heat pump, and solar...
Underfloor Heating Manifold Specifications, Sizes and HS Code
Most manifold datasheets tell you the port count and the material, then stop. That leaves out the figures that actually decide whether a manifold fits the job: the centre distance between ports, the thread standard on the circuit connections, the pressure and...
Tempering Valve for Hot Water Systems: Meeting the 50 °C Limit
Every stored hot water system carries a built-in conflict. The tank has to run hot enough to kill bacteria, and the tap has to run cool enough not to scald a child. Those two requirements do not overlap, and the component that resolves them is the tempering valve. It...