Blog
Legom News
HEPA Air Purifier Wholesale: Sourcing for Haze-Prone Markets
As an HVAC manufacturer and wholesale supplier, we watch demand for air purifiers move in two very different patterns, and the distributors who do well understand both. The first is a slow structural rise. Urbanisation, post-pandemic awareness of indoor air, and...
Heating System Valve Types Explained: Which Valve You Need
A domestic heating and hot water system contains somewhere between eight and twenty valves, and almost none of them are interchangeable. They look similar, several share the same thread sizes, and two of the most important ones share an acronym while doing opposite...
Underfloor Heating Zones: How Many You Need and How to Plan Them
Zoning means dividing a heating system into areas that can be controlled independently. Each zone gets its own thermostat, and each responds only to what that part of the building actually needs. The appeal is obvious enough. You heat the rooms in use rather than the...
Underfloor Heating Controls Explained: Thermostat to Actuator
An underfloor heating system has three mechanical parts people think about and one electrical part almost nobody does. The pipe, the manifold and the heat source get specified carefully. The controls get wired by whoever is on site that day, and that is where a...
Tempering Valve for Hot Water Systems: The 50 °C Rule
Every stored hot water system has a conflict built into it. The tank has to run hot enough to kill bacteria, and the tap has to run cool enough not to scald anyone. Those two requirements do not overlap, and the component that resolves them is the tempering valve. It...
Hydronic Systems for Light Commercial Buildings: Design Guide
Offices, shops, clinics, small hotels, and restaurants sit in an awkward middle ground. They are too large for a residential system specification and too small to justify the engineering approach applied to a hospital or a tower block. This guide covers what changes...