The water underfloor heating system was a luxurious thing. Recently, it has become a primary thing because warmth is a necessity. When the weather is icy, adding extra warmth is something that people have to do. Hypothermia causes a fuse, and the worst thing is it can take anyone’s life. Besides, installing this kind of warmer gives many benefits. The primary one and at once the one that is loved by room design enthusiasts is it does not ruin floor space. It can be installed on so many kinds of floors.
Contents
Why Choose A Water Underfloor Heating System?
One main advantage of choosing this kind of heating system is to get perfect warmth. From the aesthetic side, this doesn’t ruin the design of the floor. The homeowner can get any design they want without worrying about the additional heating device. Sometimes, they are confused about the presence of the device.
Removing it doesn’t help because when the winter comes, they need warmth. The maintenance of this kind of warmer is minimal (except if it shows unusual activity or malfunction). It also helps those who have small houses. Small houses can still have spacious rooms if the device picked is right. In this case, a water underfloor heating system is the perfect choice.
The Installation of a Water Underfloor Heating System
Here are the major steps in the installation. Not the detailed ones, but it is very useful for preparation. This is not a DIY guide because experts will be the best choice rather than installing it by yourself. By understanding the steps, homeowners can better prepare and budget for the installation process.
Install Insulation First
The room should be covered with something that insulates the heat. The function of this is to make the warmth stay longer in the room. The absence of this part will make the space quickly cold again. The type of insulation depends on how much you will spend. You can select according to your budget limit. Three popular insulations are aluminum foil, foam spray, and rigid foam.
Polystyrene Board
This is a kind of synthetic rubber that provides extra warm insulation. However, the homeowners have to consider the thickness. This will increase the height of the floor. It will involve your will on the room height final result.
Pipes
The pipes will be the route for the boiled water as the main heating component. It will distribute the heat to the whole room area. The length depends on what homeowners expect. If you expect intense heat, the coil must be close and dense. To avoid cold spots, the installation of the heating pipes has to be noticed carefully. Understanding that the lengths can be different from one another, can give you an estimation of the budget.
Screed
After the pipe’s installation is completed, a screed layer is the next. This will cover the pipes against the pressure from furniture and people’s weight. It also protects feet from direct contact with the water underfloor heating system.
Final Layer
This will cover the screed. It is not a compulsory thing in the heating system but for aesthetic purposes. It’s your choice according to your taste and your budget.
Problems in the Water Underfloor Heating System
It is a nightmare in the winter and suddenly one thing that makes you feel warm doesn’t work. The following are some possibilities that might happen.
The Main System
Check the setting for each floor because if you have different kinds of floor finishing in each room, the setting will be different. The wrong setting will not ruin the entire system, but it will waste energy. If the system is fully damaged, that is the time you should replace it with a new one.
The Floor
If the floor is incompatible with the system, it will block the heat. To avoid this, it needs preparation before the installation. If the problem occurs after the installation, you might need to have a renovation. That is why consulting with the expert is strongly suggested.
Leakage
For this kind of issue, you can detect it from the heat and the flow. If the heat reduces constantly, the pipe might leak. Or, if the pressure is lower, leakage might happen somewhere. Call the expert to get it fixed.
Blocked
The sign for this troubleshooting is the heat reduction. Check the flue vent that heads towards the outside. Remove the unwanted things that potentially block.
Bubble
This is the most common concern that usually happens, bubbles. Bubble means there is trapped air in the pipe. Not as one of the major problems, but bubbles reduce the heating ability. To detect this, there is a typical noise you can hear. The method to solve this problem is through bleeding the underfloor heating.
Where to Get Underfloor Heating Products
Legom stands at the forefront of HVAC smart home solutions, evolving from a skilled component manufacturer of thermal actuators, wax thermostatic elements, smart thermostats, and heat pumps into a leading OEM and ODM service provider. Our successful transition is rooted in our commitment to excellence and the diverse facilities we offer.
At Legom, we focus on three primary areas: innovative product development, precise customization, and impactful branding support. Our dedicated team collaborates closely with you to create products that are not only innovative but also align perfectly with your specific needs. Additionally, we go a step further by offering personalized branding options, including custom logos, to ensure your brand stands out distinctively.
Our international certifications are more than just accolades; they are a reflection of our commitment to the highest quality and reliability in our products. This dedication to excellence has allowed us to expand our reach to over 90 countries, solidifying our status as a global leader in the HVAC industry. Consult with us for the best HVAC products.