Gas Boiler for underfloor heating

A gas boiler is a type of heating system that heats water to provide warmth, usually distributed through radiators or a hydronic heating setup. It’s different from a furnace, which heats air and distributes it through ducts and vents. While a gas boiler is an integral part of many heating systems, particularly in homes or buildings that use hydronic floor heating. There are various types of heating systems, including electric baseboard heaters, heat pumps, and furnaces that may be powered by gas, electricity, or oil. In systems with a combi gas boiler, it not only provides heated water for space heating but also supplies hot water for domestic use, like showers and sinks.

How Does a Gas Boiler Work?

The perfect simulation to represent this device’s work is a circuit. The circuit has a track with one center. The cold water is pumped and sent to the boiler to be boiled. After the temperature becomes hot enough, the pump sends it to the radiator. The radiator then delivers the heat to the targeted rooms.

In the market, there are various kinds from many brands. However, the principle of the work is basically the same. Gas as the main power of this system enters the boiler through the bottled LPG or through direct connection with the conduit. The hot water will travel to the radiator to create a warm environment through pipework.

If you have a heating-only system, the hot water goes to the tank. If you have a combi (heating and hot water supply) the water goes to the showers or to the tap.

In other words, it plays a central heating role. The setting of the radiator pressure has to be adjusted and the water temperature might decrease. However, the water will move forward and finally meet the boiler again. The same water will be circling and so on. This process is under the control of the thermostat. This part will determine the temperature of the entire system.

Although the heat of the water is just the same as the central heating function, it is said to be a separate function. The water is sent to the hot spot then the temperature rises. The two flows of the result are: for the heat only, the hot water is saved in the tank. For the combi, the hot water instantly goes to the destination. Combi boilers have two functions, they are as a room heater and as a hot water supplier.

Heating and Cooling System by Legom

Pros and Cons of Gas Boiler

Before deciding to install anything (not just a gas boiler) it’s common to find out the strengths and weaknesses. Here are the underlined points that might help those who are confused in deciding to buy. Let’s do the cons first.

  • For propane gas users, it’s important to recharge the supply every time it’s running out. Not just that, you have to be careful in storing this. The temperature and the humidity of the storage have to be noticed.
  • Propane gas is pricey. But it is not impossible to use this efficiently. You just have to be more thorough in managing the finances.
  • Floor-standing one gives a difficulty in the layout. Those three cons are not to be worried because the good things from this technology are more than that. Here are the pros.
  • The difficulty in layouting the floor-standing one can be solved by choosing a wall-mounted one. This one is easy to manage, doesn’t take a large area, and the installation cost is more affordable.
  • It has a long lifetime. With normal use and good maintenance, it can survive for 10-20 years. The maintenance is not so much. It just needs some things to adjust. Sometimes a component needs replacement but it will not cost you a fortune.
  • Compared to the other kinds of boilers, it is more eco-friendly.
  • In both renovation and the building-process home, the installation is quite easy.
  • It is more economical and efficient. Every penny that you spend on this will be more valuable. It also only takes a little space. Those who love to beautify their interior design will be glad because of this advantage.

Three Different Kinds of Gas Boilers

These are three major kinds. Here are the three in brief.

Condensing

This is known as the latest technology in this field. The energy saving is incredible. You will see a significant decrease in your monthly bill.

Low temperature

It has limitations in the temperature to boost energy efficiency. For this purpose, the temperature hits a maximum of 40 degrees. However, not all low-temperature gas boilers are compatible with any heating system. Checking compatibility is a must.

Classic

The classic one is the first generation that recently doesn’t give so much compared to the others. But, about the price, it is so much cheaper than the others.

Based on the efficiency term, the condensing could reach 110%. The visible impact of this is the monthly bill reduction. The price for the latest innovations might be more expensive than the previous technology. In the long run, it is a great investment. So, which gas boiler do you want for your home heating system?